ASL INTERCOM BS 216 Manuel d'utilisateur télécharger pdf (Page 3)

3

BINAURAL HEADSET

CONNECTOR

As an option,a XLR-6 headset

connector can be fitted allowing the

user to use the headset in a

binaural function.By setting

internally mounted jumpers, each of

the channels can be assigned to

either or both headset-cans. Units

with an Auxiliary Input can also

route the intercom channel to the

left headset-can and the program

signal to the right headset-can.

PROGRAM INPUT (PS 4379, PS

6379, PS 630, PS 19A and

PS 19AM only)

A Program Input is provided

allowing the user to feed

auditorium program onto his own

loudspeaker and/or headset (local

monitoring only,the signal will not

appear on the intercom lines).

MIC MUTE

An ALL MIC MUTE push button is

provided on each PRO SERIES

Master Station or Power Supply (PS

4379 and PS 6379 additionally

have MIC mute push buttons for

each channel separately),allowing

the user to temporarily mute the

microphones of all connected PRO

SERIES user stations.When the

Master Stations or Power supplies

are being switched on,all mics are

muted automatically.

BUZZER MUTE

A BUZZER MUTE push button is

provided on each PRO SERIES

Master Station or Power Supply

allowing the user to mute the

buzzers of all connected PRO

SERIES user stations.The PS 4379

and PS 6379 additionally have

BUZZER mute push buttons for

each channel separately.

SYSTEM LINK

All new Master Stations and Power

supplies (PS 279 / 289 / 4379 /

6379) are equipped with an

additional XLR-3 connector for each

channel to allow a connection to

another ASL System without

impedance problems, and without

using power from the other system.

STAGE ANNOUNCE (PS 4379

and PS 6379 only)

This push button routes the

microphone signal directly to a line

level output.

IFB (PS 4379 and PS 6379 only)

Any channel can be switched to IFB

mode.This is used for monitoring

purposes and one way

communication from i.e. a director

or producer to a talent.If an

Auxiliary signal is assigned to the

IFB channel,it will reduce volume

by 50 % (factory setting) when the

TALK button is pushed.However,

this reduction can be adjusted by

the user.

TALK TO ALL (PS 4379 and

PS 6379 only)

By pushing and holding the TALK to

ALL button the microphone signal is

sent to all channels which are not

in IFB mode.When the IFB-in-talk-

all dip switch is ‘on’, the signal is

also sent to the channels which are

in IFB mode.

CALL TO ALL (PS 4379 and

PS 6379 only)

By pushing and holding the CALL

TO ALL button a call signal is sent

to all channels which are not in IFB

mode.

NEAR STATION FUNCTION

(PS 4379 + PS 6379 only)

To prevent system feedback, two PS

6379 / PS 4379 stations can be

linked as "near stations" when

used in the same room.This will

dim the listening level,should the

‘near’ station talk on the same

channels the ‘linked’ station is

listening to.

EXTENDED STATION

(PS 4379 + PS 6379 only)

Two stations may be linked to form

a station of 8,10 or 12 channels.

When linked, 1 station will be the

master with an active speaker and

gooseneck/electret microphone.The

speakers and microphones of the

other units will be switched off.

DC INPUT (PS 279, PS 289,

PS 4379, PS 6379 only)

A 12 - 28V DC Input is provided

should 110/240V mains power not

be available, or should a battery

powered back-up be required.

PRO SERIES

ADDITIONAL FEATURES

1 2 3 4 5 6 7 8 ... 19 20

Commentaires sur ces manuels

Pas de commentaire