ASL INTERCOM BS 216 Manuel d'utilisateur Page 12

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 11
12
WIRELESS SERIES
GENERAL HF SPECIFICATIONS
Frequency range: 2.4 - 2.483 GHz
Channel bandwidth: 7 MHz
No of full duplex RF connections: 8
TX output power: 12 dBm
Receive Sensitivity : -91 dBm
Audio sample rate : 24 ksps
Audio quality : 16 bitsTX output
power : 12 dBm
WS 200 TWO CHANNEL WIRELESS BASE STATION
WS 400 FOUR CHANNEL WIRELESS BASE STATION
WS 19 SINGLE CHANNEL WIRELESS BELTPACK
WS 29 DUAL CHANNEL WIRELESS BELTPACK
WIRELESS SERIES INTRODUCTION
The ASL wireless intercom system consists of single and dual channel wireless beltpacks and base
stations for 2 or 4 wireless connections. Special attention has been paid to the ease of operation,
enabling the user to expand his wired intercom system with a reliable and fully featured, wireless
intercom section.The system is based on the global license exempt frequency of 2.4 GHz.Within the
available band,ASL managed to establish a maximum of 8 wireless full duplex intercom connections.
Each connection can be made with a single channel or a dual channel wireless beltpack. Due to the
audio frequency range of 100Hz - 12KHz the system is very comfortable to use for longer periods of
time with an extremely high intelligibility of speech.
Base stations WS 200 and WS 400 (19",1U)
For full duplex connections,the WS 200 contains 2 send/receive units and the
WS 400 contains 4 send/receive units.A maximum of 8 full duplex connec-
tions at one location is possible, by connecting 2x WS 400 or 4x WS 200.
Interfacing to wired intercom
With switches on the rear panel of the base station,each send/receive unit
may be routed to either the built-in two channel (A and B ) partyline interface,
or to 4-wire intercom systems. Input and output volumes can be adjusted by
trimmers at the rear of the base station.
FEATURES
(further explained on page 2 + 3)
Volume control
TALK and CALL functions
MIX Control (WS 29 only)
Allows the user to listen to
either Channel A, Cannel B
and to both Channels at any
required balance.
MIC mute circuit
BUZZER mute circuit
Vue de la page 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire