ASL INTERCOM PS 430 Manuel d'utilisateur télécharger pdf (Page 6)

PRO SERIES

The PS 280 can safely drive 20 belt-

packs or 10 dual channel speaker sta-

tions, or a combination of the two.

Mic Mute

The PS 280 is provided with an ALL

MICS MUTE push button allowing the

user to mute the microphones of all

connected PRO Series user stations.

When the PS 280 is turned on, all

mics are muted automatically.

Buzzer Mute

The PS 280 is provided with an ALL

BUZZERS MUTE push button allowing

the user to mute the buzzers of all

connected user stations.

AUX Program Input

A XLR-3 connector on the rear panel

allows access to the intercom lines for

external audio signals.

An AUX signal volume control for

each channel is provided at the front

panel.

The PS 680 is a six channel power

supply in a 19”/1U metal case. It

provides all the features necessa-

ry for a 6-channel communication

system in conjunction with the

PRO Series beltpacks and speaker

stations.

The PS 680 is capable of safely driv-

ing 40 beltpacks or 20 dual channel

speaker stations, or a combination of

the two.

Mic Mute

The PS 680 is provided with an ALL

MICS MUTE push button allowing the

user to mute the microphones of all

connected PRO Series user stations.

When the PS 680 is switched on, all

mics are muted automatically.

Buzzer Mute

The PS 680 is provided with an ALL

BUZZERS MUTE push button allowing

the user to mute the buzzers of all

connected user stations.

Remote Mic/Buzzer Mute

A 25 pin sub-D connector on the rear

panel allows the user to connect a

switchbox with push buttons for

remotely muting the mics or buzzers

for each channel separately.

AUX Program Inputs,AUX

Matrix

Two XLR-3 connectors on the rear

panel allow access to the intercom

lines for two external audio signals.

On the rear panel, gain pots are pro-

vided for adjusting mic level signals.

Two AUX signal master volume con-

trols (one for each AUX input) and an

AUX Matrix are provided at the front

panel, having two AUX signal volume

controls (input 1 and 2) for each

channel.

The PS 285 is housed in 19”/1U metal

case and is capable of safely driving

20 beltpacks or 10 dual channel

speaker stations, or a combination of

the two.

Remote controlled

Standby Mode

This feature enables the user to acti-

vate or de-activate the PS 285 with

the power on/off switch of the main

power supply.The standby LED’s on

the front panel illuminate if there is

no line power (from the main power

supply) available at the input connec-

tors.The PS 285 will not supply power

until the standby mode has been

released by providing line power at

the input.

PUSH

AC Input voltage :

90 - 240 V

50 - 60 Hz

Fuse :

T 1250 mA

Supplies

+ 30V

Phantom

Power

when Mic.

Input Level

is selected

Aux Input

Input Level

Line

Mic.

Mic-

gain

Type Serial Number

BB AA

Intercom Line Intercom Line

Intercom

HOLLAND

WARNING : THIS UNIT MUST BE EARTHED.

HIGH VOLTAGE INSIDE

DISCONNECT MAINS INPUT BEFORE REMOVING COVER.

USE 250V FUSES ONLY

PUSH

AC Input voltage :

90 - 240 V

50 - 60 Hz

Fuse :

T 1250 mA

Supplies

+ 30V

Phantom

Power

when Mic.

Input Level

is selected

Aux Input

Input Level

Line

Mic.

Mic-

gain

Type Serial Number

BB AA

Intercom Line Intercom Line

Intercom

HOLLAND

WARNING : THIS UNIT MUST BE EARTHED.

HIGH VOLTAGE INSIDE

DISCONNECT MAINS INPUT BEFORE REMOVING COVER.

USE 250V FUSES ONLY

(Rear panel)

PS 285 DUAL CHANNEL BOOSTER POWER SUPPLY

PS 280 DUAL CHANNEL POWER SUPPLY

The PS 280 is a dual channel power supply in a 19”/1U metal case. It

provides all the features necessary for a 2-channel communication

system in conjunction with PRO series beltpacks and speaker stations.

PS 680 SIX CHANNEL POWER SUPPLY

The PS 285 is designed for use as an auxiliary 2-channel power supply

unit, should the main power supply of an intercom network be insuffi-

cient to drive the required number of stations. The unit has to be pla-

ced in a network in such a way that it feeds its own group of user sta-

tions.

(Rear panel)

1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

ASL INTERCOM PS 430 Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte ASL INTERCOM PS 430