PAGE 14
User Manual PS 6379 / May 2011 © ASL Intercom BV
DIP SWITCH BLOCK C
(factory setting of these dip switches is „OFF‟)
No. 6 PAGING Channel F
If this dip switch is in „ON‟ position the corresponding
channel is set into PAGING mode. (For PAGING
functions see section 12.2)
No. 5 PAGING Channel E
Same as for No. 6
No. 4 PAGING Channel D
Same as for No. 6
No. 3 PAGING Channel C
Same as for No 6
No. 2 PAGING Channel B
Same as for No. 6
No. 1 PAGING Channel A
Same as for No. 6
DIP SWITCH BLOCK D
(factory setting of these dip switches is „OFF‟)
No. 6 TALK MOMENTARY Channel F
If this dip switch is in „ON‟ position the corresponding
TALK button of that channel is set to “momentary
only”
No. 5 TALK MOMENTARY Channel E
Same as for No. 6
No. 4 TALK MOMENTARY Channel D
Same as for No. 6
No. 3 TALK MOMENTARY Channel C
Same as for No. 6
No. 2 TALK MOMENTARY Channel B
Same as for No. 6
No. 1 TALK MOMENTARY Channel A
Same as for No. 6
DIP SWITCH BLOCK E
(factory setting of these dip switches is „ON‟)
No. 6 IFB or AUX INPUT for IFB Channel F
If this dip switch is in „OFF‟ position, the signal
coming from the AUX input (#34) is routed to the IFB
channel
No. 5 IFB or AUX INPUT for IFB Channel E
Same as for No. 6
No. 4 IFB or AUX INPUT for IFB Channel D
Same as for No. 6
No. 3 IFB or AUX INPUT for IFB Channel C
Same as for No. 6
No. 2 IFB or AUX INPUT for IFB Channel B
Same as for No. 6
No. 1 IFB or AUX INPUT for IFB Channel A
Same as for No. 6
DIP SWITCH BLOCK F
(factory setting of these dip switches is „OFF‟)
No. 6 STAGE ANNOUNCE MIC. SELECT
This dip switch was intended for use in EXTENDED
STATION mode, which mode has been discontinued.
Leave the dip switch in „OFF‟ position (= factory
setting).
No. 5 SPEAKER DIM and STAGE ANNOUNCE
If this dip switch is in „OFF‟ position (= factory setting)
the speaker of the PS 6379 does not reduce in
volume (no attenuation) when the STAGE
ANNOUNCE button is pushed. In „ON‟ position, the
speaker volume is dimmed to zero for as long as the
STAGE ANNOUNCE button is being pushed.
No. 4 STAGE ANNOUNCE and AUXILIARY
If this dip switch is in „OFF „ position (= factory
setting) the AUX signal (coming from the AUX input
connector #34) is not sent to the Stage Announce
output. If this dip switch is in „ON‟ position this AUX
signal is sent to the Stage Announce output.
.
No. 3 RESERVED
No. 2 RESERVED
No. 1 MIC MUTE
When in SYSTEM LINK and when this dip switch is
in „OFF‟ position (= factory setting) the Mic Mute
signals of the connected intercom system are routed
to the outputs of the PS 6379. If the dip switch is in
„ON„ position, the Mic Mute signals of the connected
intercom signals are not detected by the PS 6379
and not routed to the outputs of the unit.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels